✓ ISO 9001 Certified Factory ✓ CE Certified / SGS Tested ✓ Ships Worldwide ✓ Free Samples Available
Get a Quote

Solid Polycarbonate Sheets

A solid polycarbonate sheet is a single, homogeneous extruded sheet with no hollow chambers. We extrude it in 1.5 mm to 20 mm, clear and tinted, with UV protection co-extruded on both faces.

Request a Quote Ask for Free Samples

Curved transparent canopy over a walkway supported on a steel frame

It is the material you specify when the job needs optical clarity plus impact strength that glass and acrylic cannot deliver: machine guards, security glazing, canopies, skylights, screens and sound barriers. This page is the specification reference for the solid line — thickness range and what each band is good for, UV construction and why it decides service life, how solid compares with multiwall and acrylic, and what to send us for a quotation.

Solid Polycarbonate Sheet Specifications

Standard specification

Thickness1.5 / 2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 / 15 / 20 mm
Standard sheet size1220 × 2440 mm
Large format2050 × 3050 mm, 2100 × 5800 mm
Tolerance on thickness± 5 %
ColoursClear, bronze, blue, green, opal, grey, black
Light transmission (clear, 3 mm)up to 91 %
UV protectionCo-extruded on both faces, 50–100 μm
Density1.20 g/cm³
Service temperature−40 °C to +120 °C
Linear thermal expansion0.065 mm per metre per °C
Reaction to fireB-s1,d0 to EN 13501-1, UL94 V-2
Acoustic reduction (3 mm)approx. 27 dB
StandardEN 16240 for solid polycarbonate sheets
Minimum order (MOQ)1 × 20GP container — mixed sizes, colours and thicknesses accepted

Sheet sizes above are the formats we hold in regular production. Cut-to-size panels, CNC routing, edge polishing and protective film options are all available on the same order — see the fabrication note further down.

What Each Thickness Band Is For

Thickness is the specification that most often gets chosen by habit rather than by load. The bands below are how the material is actually specified in practice:

ThicknessTypical useWhy this thickness
1.5 – 2 mmMachine guards, signage faces, display panelsLight, formable, sufficient for interior protection only
3 mmWindows, partitions, small canopies, guardsThe general-purpose grade; balances stiffness and weight
4 – 5 mmCanopies, screens, bus shelters, sound barriersSpans and impact loads beyond what 3 mm handles
6 – 8 mmSkylights, rooflights, security glazingWind and snow load at realistic fixing centres
10 – 12 mmCounter screens, machine enclosures, aquariumsDeflection control and vandal resistance
15 – 20 mmHeavy machinery guards, observation windowsProjectile and pressure resistance where specified

For roof and canopy work, the thickness is set by the span between supports and the wind load at the site, not by the panel size. A 4 mm sheet over 600 mm centres behaves very differently from the same sheet over 1200 mm centres, and the fixings become the weak point before the sheet does. If you send the span and the wind load, we will calculate the thickness rather than guess it.

UV Protection Is What Decides Service Life

Unprotected polycarbonate yellows and turns brittle in sunlight. The UV layer is not a coating applied afterwards for appearance; it is co-extruded into both faces during production, and it is the difference between a sheet that lasts ten years outdoors and one that fails in two.

  • Double-sided UV. Both faces are protected, so the sheet can be installed either way up and can be reversed if a face is damaged during installation.
  • Thickness of the UV layer. 50 to 100 μm is the normal specification range. Thinner layers are the single most common way a cheap sheet reaches a low price.
  • How you can check. The UV face usually carries a printed film. Mark which side is UV before you remove the film — after removal the two faces look identical, and on single-sided sheet the wrong face up is a premature failure.
Solid polycarbonate sheets of different thickness and colour stacked to show the solid cross section

Solid Polycarbonate vs Multiwall vs Acrylic

PropertySolid polycarbonateMultiwall polycarbonateAcrylic (PMMA)
Impact strengthHighest; does not shatterHigh, but thin walls dentBrittle; cracks and splinters
Thermal insulationLow (single layer)High (chambers)Low (single layer)
Weight for the same spanHeavyLightHeavy
Optical clarityVery goodGood, with visible ribsBest
Scratch resistanceModerate; hard coat availableModerateBetter
Chemical resistancePoor to solvents and alkalisPoor, same familyModerate
Typical useCanopies, guards, security glazingRoofing, greenhouses, skylightsDisplays, signage, formed parts

The short version: solid for strength and clarity in a single layer, multiwall when insulation matters more than weight, acrylic when optical quality matters more than impact. If the application is a roof over a heated space, a multiwall sheet will usually be the better answer even though it costs less per square metre of performance — see polycarbonate glazing compared with acrylic and glass for the full comparison.

Clear, bronze and blue solid polycarbonate sheets stacked to show colour and light transmission

Fabrication and Fixing

Solid sheet cuts, drills and machines like a hardwood, but the coefficient of expansion is the detail that causes most failures. At 0.065 mm per metre per degree, a 2 m panel moves about 1.3 mm over a 10 °C swing. Fixings must allow that movement:

  • Drill holes 2 to 3 mm larger than the fastener shank, and use washers with a sealing face.
  • Never clamp the sheet rigidly along an edge; use slotted or oversize holes so the panel can move.
  • Leave the sheet short of the frame profile so it does not bear on the metal when it expands.
  • Do not use solvent-based sealants, cleaners or adhesives — they stress-crack polycarbonate. Use neutral-cure silicone or EPDM.
  • Cold bending radius is 100× thickness minimum, 175× for a safer working figure.

Cracking that starts at a fixing hole is the most common field failure on this material and it is almost always a fixing detail rather than a sheet defect — the mechanism is covered in polycarbonate sheet cracking at fixings.

Supply: Sizes, Volume and Packing

We extrude and export, so the commercial side is set by the line rather than by a trading desk:

  • Formats. Standard sheets, cut-to-size panels, and CNC-machined parts with polished edges.
  • Colour. Clear, bronze, blue, green, opal, grey and black in regular production; specials on request.
  • Packing. Both faces filmed, interleaved, edge-protected, banded and crated. Sheets over 3 m are shipped in crates sized to the container length, so panel length has to be fixed at order stage rather than at dispatch.
  • Documentation. Material and UV data, test reports on request, and packing lists that match the crate marking.

Because packing and container length interact, the panel length you order is a commercial decision as much as an engineering one — the details are in packing, storage and container loading.

Where We Are Honest About the Limits

  • Solid sheet is not an insulator. A single layer of polycarbonate has a U-value around 5.8 W/m²K. If the application is a heated space under the roof, a multiwall sheet at 3.8 or a triple wall at 2.3 will outperform it on energy, and solid is the wrong choice regardless of strength.
  • It is not chemically inert. Solvents, alkalis, ammonia and some cleaning agents cause stress cracking. In agricultural, marine and industrial environments where chemicals are present, this has to be checked against the actual exposure.
  • It scratches, and the scratch is permanent. A hard-coated grade improves it; nothing makes it glass-hard. Where abrasion is continuous, a different material is the honest answer.
  • Fire classification follows the full build-up. Our sheets carry B-s1,d0 as tested; the mounted assembly, the frame and any sealant are part of what a fire officer will assess.
  • We do not claim ballistic performance on standard sheet. Security glazing has to be specified as a rated assembly, and we will tell you when the requirement is beyond standard material.

More on Solid Polycarbonate Sheets

Thickness selection, cracking at fixings, fabrication and job stories are covered in the solid polycarbonate sheets guides and articles — a library of technical write-ups for this range. If you would rather have the answer in one message, send your span, load and destination and we will come back with the sheet build and a quotation.

Solid Polycarbonate Sheet: Common Questions

For most domestic and commercial canopies 4 to 5 mm over supports at 600 mm centres, or 6 to 8 mm where spans reach 1200 mm or the site is exposed. Thickness is set by span and wind load, not by panel size. Send the span and wind load and we will calculate it.

Yes, substantially. Solid polycarbonate resists impact without shattering while acrylic is brittle and can crack or splinter. Acrylic wins on optical clarity and scratch resistance, which is why it is used for displays rather than for protection.

The sheet itself blocks almost all UV radiation, and the co-extruded UV layer protects the polycarbonate from sunlight. Without that layer the sheet yellows and becomes brittle in a few years outdoors.

Yes, but it is a single layer with a U-value around 5.8 W/m2K, so it loses more heat than a multiwall sheet. It is chosen for roofing where impact resistance, clarity and vandal resistance matter more than insulation, such as unheated canopies and covered walkways.

About 0.065 mm per metre per degree Celsius. A 2 m panel moves roughly 1.3 mm over a 10 degree swing, so holes must be drilled 2 to 3 mm oversize and the sheet must never be clamped rigidly.

Anything solvent-based, abrasive, alkaline or ammonia-containing. Use a mild neutral detergent with water and a soft cloth. Solvents cause stress cracking, which appears as fine crazing around fixings and edges.

Send your specification and get a quotation

Send us these four details and we will come back with a landed cost:

  1. Sheet type and thickness
  2. Size and quantity
  3. Application (roof / skylight / partition...)
  4. Destination country or port

Related Articles

Questions about specs or pricing? Chat with us 👋