Long spans, high wind uplift, and spectators underneath. The panel must not shatter and fall.
Specification Guide
| Thickness | 16 mm triple-wall typical, 16 mm 5-wall X for long spans |
|---|---|
| Span | Up to 1,400 mm between purlins at 16 mm 5-wall |
| Weight | 1/6 of glass — often avoids structural upgrade |
| Failure mode | Dents or cracks but stays in place, unlike glass |
| Fire | UL94 V-2 or B1 depending on specification |
Why not glass
Glass gives 20+ years and better scratch resistance, but it shatters into falling fragments and weighs 6 times more. Over an occupied stand that means laminated build-ups and heavier steel — usually more expensive than upgrading the polycarbonate thickness.
Planning this type of project?
Send us these four details and we will come back with a landed cost:
- Sheet type and thickness
- Size and quantity
- Application (roof / skylight / partition...)
- Destination country or port
Common Questions
It depends on purlin spacing and local wind or snow load. Send the spacing and we will tell you the minimum thickness that spans it safely.
Yes — aluminium profiles, EPDM gaskets and screws can ship with the sheets so nothing is missing on site.
Yes, cut and drilled to your drawing, delivered as a ready-to-fix kit.
7 days for standard sizes, 12-15 days with cutting and fabrication.