Highway, rail and industrial noise — each has a different dominant frequency and different load case.
Specification Guide
| Highway | Wind load dominates; 8-10 mm multiwall, transparent panels above vision line |
|---|---|
| Rail | Vibration fatigue; flexible mounting and thicker edge support |
| Industrial | Chemical resistance and cleanability; solid sheet where washdown happens |
| Reduction | Typically 20-30 dB(A) for a well-sealed barrier |
| Sealing | The frame seal matters as much as the panel |
The seal matters more than the panel
A 25 dB panel in a poorly sealed frame gives you 12 dB. Most failed barriers fail at the joints, not through the sheet — specify gaskets and continuous fixing, then check the installation.
Planning this type of project?
Send us these four details and we will come back with a landed cost:
- Sheet type and thickness
- Size and quantity
- Application (roof / skylight / partition...)
- Destination country or port
Common Questions
It depends on purlin spacing and local wind or snow load. Send the spacing and we will tell you the minimum thickness that spans it safely.
Yes — aluminium profiles, EPDM gaskets and screws can ship with the sheets so nothing is missing on site.
Yes, cut and drilled to your drawing, delivered as a ready-to-fix kit.
7 days for standard sizes, 12-15 days with cutting and fabrication.