Crops need light, not heat. The wrong sheet either bakes the plants or blocks the spectrum they need.
Specification Guide
| Light transmission | 78-82% (clear), 45-55% (opal) |
|---|---|
| Thickness | 8 mm twin-wall typical, 10 mm triple-wall for cold climates |
| Anti-drip | Condensation control to stop droplets on leaves |
| UV | Dual-sided so the panel survives re-cladding |
| Span | Up to 900 mm between purlins at 8 mm |
Why 8 mm twin-wall is the default
8 mm twin-wall gives the best balance of insulation, light transmission and price for most greenhouses. Going to 10 mm triple-wall cuts heat loss further but reduces light by 5-8% — only worth it if winter temperatures drop below about -10°C.
Planning this type of project?
Send us these four details and we will come back with a landed cost:
- Sheet type and thickness
- Size and quantity
- Application (roof / skylight / partition...)
- Destination country or port
Common Questions
It depends on purlin spacing and local wind or snow load. Send the spacing and we will tell you the minimum thickness that spans it safely.
Yes — aluminium profiles, EPDM gaskets and screws can ship with the sheets so nothing is missing on site.
Yes, cut and drilled to your drawing, delivered as a ready-to-fix kit.
7 days for standard sizes, 12-15 days with cutting and fabrication.