Retrofit daylight into a roof that was not designed for it, without stopping production.
Specification Guide
| Profile | PC820 / PC840 / PC900 corrugated matches metal roofing |
|---|---|
| Thickness | 0.8-1.5 mm single skin |
| Installation | Lay into existing profile runs, no new openings |
| Load | Added load negligible compared to glass skylights |
| Lead time | 7 days standard, cut-to-length available |
What to check before ordering
Measure the existing profile pitch and cover width first — a mismatched profile means water tracking back under the laps. Also confirm the purlin spacing; if it exceeds the panel span, you need additional purlins or a thicker sheet.
Planning this type of project?
Send us these four details and we will come back with a landed cost:
- Sheet type and thickness
- Size and quantity
- Application (roof / skylight / partition...)
- Destination country or port
Common Questions
It depends on purlin spacing and local wind or snow load. Send the spacing and we will tell you the minimum thickness that spans it safely.
Yes — aluminium profiles, EPDM gaskets and screws can ship with the sheets so nothing is missing on site.
Yes, cut and drilled to your drawing, delivered as a ready-to-fix kit.
7 days for standard sizes, 12-15 days with cutting and fabrication.