Sheets arrive cut, drilled, chamfered and ready to install. Cutting on site costs labour and creates cracks — we do it on a CNC bench before packing.
Fabrication Capabilities
| Cut to size | CNC saw, any length x width, tolerance ±1 mm |
|---|---|
| CNC routing | Curves, arcs, notches, cut-outs to your DXF |
| Drilling | Pre-drilled fixing holes to your template |
| Edge finishing | Square, chamfered, polished or deburred |
| Bending | Cold bend and thermoform, minimum radius per thickness |
| Sealing | Edge tape, breather tape, aluminium U-profile |
| Assembly | Panels supplied as ready-to-fix kits with fixings |
Why Machine It Before Shipping
- Cracks start at site cuts. A hand-held angle grinder leaves micro-fractures that grow under thermal cycling.
- Drilling in place is worse. Holes drilled on a roof are rarely the right size for thermal movement.
- Labour on site costs more. Fabrication in our workshop is priced into the sheet, not billed by the hour on your scaffold.
- Fewer rejects. If we cut it wrong, it is our cost. If it is cut wrong on site, it is yours.
Have drawings ready?
Send us these four details and we will come back with a landed cost:
- Sheet type and thickness
- Size and quantity
- Application (roof / skylight / partition...)
- Destination country or port
Fabrication Questions
A drawing is fastest, but if you only know the finished dimensions or the opening size, send those and we will work backwards.
±1 mm on cut dimensions, ±0.5 mm on drilled hole position.
Yes, but fabrication adds 5-8 days to the lead time. Tell us upfront.
DXF, DWG, PDF or a dimensioned sketch with clear measurements.