Barns, poultry houses, livestock sheds and storage buildings — agricultural roofs take wind, hail and ammonia. The wrong panel yellows in three seasons and cracks at the fixings.
Specification Guide
| Thickness | 8 mm twin-wall, 10 mm triple-wall for heated houses |
|---|---|
| UV protection | Dual-sided 50 μm co-extruded — ammonia resistant |
| Span | Up to 900 mm between purlins at 8 mm |
| Light transmission | Opal 45-55% to avoid stressing animals |
| Fixings | Oversized holes + EPDM washers for thermal movement |
| Ammonia resistance | Available with protective coating for poultry houses |
Why Ammonia Resistance Matters
Poultry and pig housing releases ammonia that attacks the UV layer on standard sheet. The panel does not fail at once — it yellows, then the surface crazes, then it cracks at the screw holes. Ask for the ammonia-resistant grade and specify it on the PO, because standard sheet looks identical on delivery.
Roof or Side Wall
Roof panels need the thicker grade and tighter purlin spacing because they carry wind uplift. Side-wall panels can go thinner. If you are re-cladding an existing building, measure the purlin spacing first — 900 mm is fine at 8 mm, 1,200 mm needs 10 mm or an extra purlin.
Planning an agricultural building?
Send us these four details and we will come back with a landed cost:
- Sheet type and thickness
- Size and quantity
- Application (roof / skylight / partition...)
- Destination country or port
Agricultural Questions
The standard grade does not. Specify the ammonia-resistant coating and confirm it on the PO.
No — go to 10 mm or add a purlin. Undersized sheet flaps in wind and cracks at fixings.
Dual-sided UV co-extrusion gives 10 years. Single-sided or cheap sheet can yellow in 2-3 seasons.
Yes — screws, EPDM washers and profiles can ship with the order.