Atriums, malls and offices: light without glare, heat without air-conditioning load.
Specification Guide
| Thickness | 10-16 mm multiwall or 5-wall X |
|---|---|
| Colour | Opal white for diffusion, bronze for solar control |
| U-value | 2.0-3.0 W/m²K depending on structure |
| Glare | Opal diffuses light so no hot spots below |
| Fire | B1 available for public buildings |
Controlling glare and heat
Clear sheet under a skylight creates a bright hot spot directly below and leaves the edges dim. Opal white spreads the light across the whole floor plate, which is why most retail atriums specify it even though it transmits less total light.
Planning this type of project?
Send us these four details and we will come back with a landed cost:
- Sheet type and thickness
- Size and quantity
- Application (roof / skylight / partition...)
- Destination country or port
Common Questions
It depends on purlin spacing and local wind or snow load. Send the spacing and we will tell you the minimum thickness that spans it safely.
Yes — aluminium profiles, EPDM gaskets and screws can ship with the sheets so nothing is missing on site.
Yes, cut and drilled to your drawing, delivered as a ready-to-fix kit.
7 days for standard sizes, 12-15 days with cutting and fabrication.