✓ ISO 9001 Certified Factory ✓ CE Certified / SGS Tested ✓ Ships Worldwide ✓ Free Samples Available
Get a Quote

Ceiling Panels

Ceiling panels divide into two unrelated families that get specified under one heading: PVC and WPC panels, which are a decorative skin on a concealed grid, and aluminium panels, which are a metal tile on an exposed or semi-concealed grid. Both are dry-fixed to a grid, both give access above, and they fail in different ways. The choice usually comes down to whether the client wants a flush decorative ceiling or a serviceable technical one.

Request a Quote Ask for Free Samples

Suspended ceiling grid with panels installed in a commercial interior

This page covers the three panel types, the two grid systems, how access and inspection are handled, and what to specify for a quotation. System options and installation are covered in the ceiling panel systems guide; the acoustic side, including NRC and CAC, in acoustic ceiling design, and everything published on this range is indexed in the ceiling panel articles.

Ceiling Panel Specifications

Range at a glance

PVC panel5 – 8 mm thick, 200 – 300 mm wide, 3 – 6 m long
WPC panel8 – 10 mm thick, wood-plastic composite core
Aluminium panel0.5 – 0.8 mm coil-coated aluminium tile
Panel formats300 × 300, 600 × 600 mm tiles; linear panels
GridExposed T-grid, semi-concealed, or concealed carrier
Grid materialGalvanised steel or aluminium, 24 mm or 15 mm face
AccessLay-in tiles or hinged access panels
FinishPVC film, powder-coated aluminium, wood grain, white
FireB1 / B-s1,d0 depending on panel and build-up
Service conditionInterior; PVC and WPC not for exterior use
Minimum order (MOQ)1 × 20GP container — mixed profiles and colours accepted

Three Panel Types and What They Are Good At

TypeStrengthWeaknessTypical use
PVC panelCheapest, waterproof, easy to clean, wide decor rangeSoft surface, can sag on long spans, discolours with heatBathrooms, kitchens, shops, low-budget fit-out
WPC panelBetter rigidity and a more convincing wood lookHeavier, higher costResidential and hospitality interiors, feature ceilings
Aluminium panelDimensionally stable, does not burn, precise joints, serviceableHigher cost, colder appearance, condensation on cold surfacesCommercial, transport, kitchens, technical ceilings

The practical distinction is serviceability. An aluminium lay-in tile lifts out to give access to a valve or a junction box; a PVC linear ceiling on a concealed carrier does not, and needs a separate access hatch. If the ceiling is a service zone, that single fact usually decides the specification regardless of price.

Grid Systems Decide the Look

GridAppearanceTrade-off
Exposed T-gridVisible grid lines in a regular moduleCheapest and easiest to service; the grid is part of the design whether you want it or not
Semi-concealedThin shadow line, tiles sit slightly below the gridBetter appearance, tiles slightly harder to remove
Concealed carrierFlush, jointless appearanceNo access without dismantling; needs separate hatches

Ceiling height interacts with all three. A concealed carrier with linear panels needs more depth above the ceiling than a lay-in tile on a T-grid, and in a refurbishment that depth is often the thing that decides which system is possible.

Commercial ceiling with acoustic panels and a suspended grid

Access, Inspection and the Plenum

  • Plan the access before the ceiling. Every valve, actuator and junction box needs a route. Lay-in tiles give access anywhere; a concealed ceiling needs hatches positioned in advance.
  • The plenum is a service void, not storage. Cables and pipes must be supported independently of the ceiling grid — hanging services from the grid is how ceilings sag.
  • Depth. A T-grid needs roughly 100 mm of clear depth below the structure for the grid and tile; linear systems on carriers need more.
  • Perimeter. Walls are rarely square. A perimeter trim allows the grid to be set out from the centre and absorb the error at the edges.
  • Condensation. Aluminium panels on an unventilated cold plenum will show condensation on the room side. In kitchens and near entrances this needs ventilation design, not a different tile.
  • Fire and smoke. Grid, hangers and panels form an assembly; where a fire-rated ceiling is required, the whole build-up has to be certified, not just the panel.

Which Ceiling for Which Room

RoomSpecification
Bathroom or kitchen at homePVC linear panel: waterproof, wipe-clean, cheap, no access needed
Office or meeting roomAcoustic tile on T-grid: absorption, access, standard module
Retail or hospitalityWPC or aluminium on concealed carrier: appearance first, access via hatches
Commercial kitchenAluminium: cleanable, non-combustible, serviceable
Plant room or service corridorExposed T-grid with plain tiles: access and cost

Supply, Packing and Container

  • Panels and grid together. Grid, hangers, perimeter trim and access panels are part of the system; sourcing the grid locally is where module mismatches start.
  • Lengths. Linear PVC panels come in 3 to 6 m; long lengths are limited by container length and by handling on site.
  • Packing. Panels are light and bulky and crush easily at the edges — the packing is what protects the visible face.
  • Spares. Hold 2 to 5 % of tiles or a spare length per decor for later damage, from the same batch.

Where We Are Honest About the Limits

  • PVC ceilings are not for exterior use. UV and heat distort them. Under a canopy or in a semi-outdoor space, aluminium is the correct material.
  • Soft panels mark. A PVC ceiling scuffs and cannot be repaired locally; a damaged panel is replaced, which is easy on a lay-in grid and awkward on a concealed one.
  • Access is designed, not improvised. A concealed ceiling with hatches added later never looks right. Decide the access strategy first.
  • Acoustic performance is not a property of the tile alone. NRC depends on the plenum and any insulation above; CAC depends on the tile, the grid and the edge detail together.
  • Fire ratings belong to the assembly. A panel classification does not automatically certify a ceiling; the grid and hangers are part of what is assessed.
  • Sagging is a span or humidity problem. On a wide span in a humid room, a soft panel will sag whatever the brand. Battens or a tighter grid, not a thicker panel, is the fix.

More on Ceiling Panels

System options, panel types and installation sequence are in the ceiling panel systems guide; absorption and speech privacy in acoustic ceiling design, NRC and CAC. Send the room type, the ceiling area, the plenum depth available and whether access is needed, and we will confirm the panel and grid before quoting.

Ceiling Panel: Common Questions

PVC is the cheapest and waterproof choice for domestic bathrooms and kitchens. WPC gives a better wood look and more rigidity for residential and hospitality interiors. Aluminium is the technical choice: dimensionally stable, non-combustible and serviceable, for commercial and kitchen ceilings.

No. UV and heat distort them, and they are an interior product. Under a canopy or in any semi-outdoor space, aluminium panels are the correct material.

A lay-in tile on an exposed T-grid lifts out anywhere. A concealed carrier system gives no access without dismantling, so hatches must be planned and positioned before the ceiling goes up rather than added later.

NRC measures how much sound the ceiling absorbs within the room, which controls reverberation. CAC measures how much sound passes between adjacent rooms through the plenum. A ceiling can be good at one and poor at the other.

Roughly 100 mm of clear depth below the structure for a T-grid and tiles. Linear systems on concealed carriers need more. Services must be supported independently of the grid, never hung from it.

Usually span or humidity rather than the panel brand. Soft PVC panels sag on wide spans in humid rooms. The fix is a tighter grid or battens, not a thicker panel.

Send your room type, ceiling area and plenum depth

Send us these four details and we will come back with a landed cost:

  1. Sheet type and thickness
  2. Size and quantity
  3. Application (roof / skylight / partition...)
  4. Destination country or port

Related Articles

Questions about specs or pricing? Chat with us 👋